Closed Circuit Cooling Towers Service 1
Closed Circuit Cooling Towers Service 1
Closed Circuit Cooling Towers Service 1
Closed Circuit Cooling Towers Service 1

Closed Circuit Cooling Towers Service 1

The key difference between open and closed-circuit cooling towers is that the tube in a closed-loop system isolates the process fluid from the outside air, keeping it clean and free from contamination. This isolation prevents equipment blockage and corrosion caused by fluid pollution, ensuring sustainable process operation.

Email: yubk@lydrev.com

Description

  • The Evaporative Cooler (also known as Closed-Circuit Cooling Tower) is a high-efficiency, energy-saving, and water-saving cooling device that uses the evaporation of water film outside the tubes to remove the cooling heat inside the tubes. It is an ideal replacement product for open-circuit cooling towers. The biggest difference between it and open-circuit cooling towers lies in this: in the closed-circuit cooling tower, the cooled medium inside the heat exchange tubes undergoes partition-wall heat and mass transfer with the cooling water and air outside the tubes, and the cooled medium remains in a sealed state at all times. This avoids the problem of medium contamination caused by the contact between the cooled medium and air, thereby reducing equipment failures such as blockage and damage due to the contamination of the cooled medium, and better ensuring the continuous and stable operation of the entire process.

    detail-1
  • It can be matched with industrial circulating water systems in industrial manufacturing fields such as blast furnace and converter cooling in steel mills, central air conditioning, instruments and meters, medium-frequency electric furnaces for casting, generator sets in power plants, nuclear power plants, substations, chemical industry, pharmaceuticals, welding, pressing, and hydraulic machinery.

    The closed-circuit cooling tower transfers heat through the evaporation of water film sprayed on the outer surface of the heat exchange coils. During operation, cooling water is delivered to the upper part of the heat exchange coil group by a water pump, and evenly sprayed on the outer surface of the coil group through nozzles to form a uniform water film. The high-temperature working medium enters from the header at the upper part of the coil group and is distributed to each coiled tube to release heat. First, the high-temperature working medium inside the tubes transfers heat to the water film through the tube wall, causing the water film to evaporate. When the water film evaporates into water vapor, it transfers part of the heat together with the water vapor itself to the air in the form of latent heat, which is then extracted by the exhaust fan. The cooling water that is not evaporated drops into the water tank at the bottom and is recycled by the spray water pump. The equipment is equipped with an automatic water replenishment valve, which continuously replenishes the water lost to evaporation in the closed-circuit cooling tower.

    detail-2
  • detail-12
  • detail-13
  • detail-14

Fill in Your Requirements

    • Name:

    • *Email:

    • Country:

    • Tel/WhatsApp:

    • *Message:

    Related Product

    Home Tel Mail Inquiry