Evaporative cooler(condenser) for process fluid service 1
Evaporative cooler(condenser) for process fluid service 1
Evaporative cooler(condenser) for process fluid service 1
Evaporative cooler(condenser) for process fluid service 1

Evaporative cooler(condenser) for process fluid service 1

In the petrochemical, chemical, LNG, and other process industries, heat transfer is traditionally handled by a system comprising shell-and-tube heat exchangers, plate heat exchangers, cooling towers, and circulating pumps. In contrast, the evaporative cooler (or condenser) integrates all these functions into a single skid-mounted unit, with the process fluid flowing directly through its tubes. This integrated approach simplifies the process, reduces land usage, and lowers operating costs. It is commonly applied in processes such as deep carbon processing, atmospheric and vacuum distillation, alcohol plants, and compressor train sections.

Email: yubk@lydrev.com

Description

  • The EAC Series Evaporative Condenser is a high-efficiency, energy-saving, and water-saving cooling device that uses the evaporation of water film outside the tubes to remove the cooling heat inside the tubes. It is one of the key heat exchange equipments in refrigeration systems. Its function is to condense the high-temperature, high-pressure superheated vapor refrigerant discharged by the compressor, enabling the refrigeration system to circulate and achieve the purpose of refrigeration.
    The evaporative condenser (cooler) uses the evaporation of water film outside the tubes to take away the heat released by the condensation of steam inside the tubes under the forced action of a fan. It follows a heat exchange principle that focuses on latent heat exchange, with heat transfer and mass transfer occurring simultaneously.

    detail-1
  • Its working principle is as follows:
    Spray cooling water is delivered to the upper part of the heat exchange coil by the circulating water pump, and evenly sprayed on the outer surface of the heat exchange tubes through nozzles, forming a uniform water film.
    The superheated high-pressure refrigerant discharged by the compressor enters the heat exchange module from the header at the upper part of the heat exchange coil, and is evenly distributed to each heat exchange tube.
    The heat of the working medium inside the tubes is transferred to the water film through the tube wall, causing the water film to evaporate. After the water film outside the heat exchange tubes evaporates into water vapor, it finally transfers heat to the air in a saturated state under the forced action of the fan.
    The cooling water that is not evaporated drops into the water tank at the bottom, and is delivered for reuse by the spray water pump.
    The equipment is equipped with an automatic water replenishment valve, which continuously replenishes the water lost to evaporation in the evaporative condenser.

    detail-2
  • detail-6
  • detail-7
  • detail-8

Fill in Your Requirements

    • Name:

    • *Email:

    • Country:

    • Tel/WhatsApp:

    • *Message:

    Home Tel Mail Inquiry